1. Construction
The belt has been manufactured into endless type during production. Its tensile strength at reinforcement splice is 90% of the belt tensile strength. There is no obvious splice on the belt surface. So the belt operation is smooth and elongation is very small.
2. Specification
Intensity: 100 N/mm--3150N/mm
Width: 300mm--2000mm
3. Length and Limit deviation
| Endless Conveyor Belt length(m) | Limit Deviation(mm) |
| ≤15 | 50 |
| 15-20 | 75 |
| ≥20 | 100 |
Features:
No-joint ring conveyor belts are made with no-joint in production. The features: no-hoint in the carcass ensures no obvious joint defect on the surface, even tension, smooth transporting, low elongation, and that working life is not affected by any joint damage. The carcass is made of 2-6 plies of fine quality all cotton/polyester cotton canvas or NN-200 nylon/polyester canvas as tension layers.