Find Auto-matic Washing Line, Automatic Washer And Dryer, Automatic Glass Washer And Dryer Line on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Acid & Alkali Resistant Conveyor Belt > Insulating Glass automatic washing Line

Insulating Glass automatic washing Line

  • Insulating Glass automatic washing Line
  • Insulating Glass automatic washing Line
  • Insulating Glass automatic washing Line
  • Insulating Glass automatic washing Line

Insulating Glass automatic washing Line

    Unit Price: 35000 USD
    Min. Order: 1 Set/Sets
    Packaging: container,wooden
    Brand: Lijiang
    Transportation: Ocean
    Place of Origin: shandong,China
    Port: Qingdao

Product Description

Vertical Insulating Glass Washing Machine With Six Pieces of Soft Brushes

Technical introduction:

A, this machine adopts Siemens control system, which can freely adjust the cleaning speed of the machine.

B, the machine is divided into manual and automatic control mode, each section can be controlled separately, easy to use and concise.

C, LJBQX2000 vertical washing machine includes LJBQX2000 feed section, LJBQX2000 cleaning and drying section, LJBQX2000 discharge section.

LJBQX2000 feed section is inclined vertical structure. The conveyor roller is abrasion-resistant, acid and alkali resistant polyurethane roller, adopts stepless frequency conversion speed regulation, the glass can run smoothly at an appropriate speed, and the foot switch can start and stop the transmission at any time according to the working conditions. The coating detection alarm system can timely and accurately detect whether the coated surface of the glass is placed correctly or not, the placement is wrong, the buzzer alarms, and the transmission stops.

The LJBQX2000 cleaning discharge section is an inclined vertical structure. The transfer roller is a wear-resistant, acid and alkali resistant polyurethane roller, adopts stepless frequency conversion speed regulation, the glass can run smoothly at an appropriate speed, and is equipped with inspection lamps to check the effect of glass cleaning.

The glass must be edged before cleaning, otherwise it will scratch the supporting wheel and make the hair on the brush fall off, reducing the service life.

1. Adjust the water temperature controller in the electric box according to the actual situation to set the water temperature, generally in the range of 15 °C to 50 °C.

Neutral detergent can also be added to achieve the best cleaning effect.

2. Adjust the speed regulating knob on the cleaning machine panel and adjust the transmission speed according to the glass dirt.

3. The thickness of cleaning glass is 3 ~ 15 mm, and trace water droplets are allowed on the back edge of the glass after drying.

4. After the installation and adjustment, please run the test according to the operation instructions. If the glass is broken due to poor adjustment, it is necessary to quickly stop and clean the broken glass, so as not to scratch the brush and the transfer roller.

5. All parts of the machine are well grounded.

Glass washing machine - LJBQX2025

Main feature:

• Using 6 pieces of soft brushes with 0.1mm soft hair, can wash low-e glass

• Pre-washing (Optional)

• New air knife uses aluminum profile (Duckbill Air Knife), the size of the air outlet is adjusted by the aluminum profile duck beak. This can reduce the number of adjusting screws, ensure that each screw is not loose, and avoid the resonance of the air knife.

• The air knife can automatically adjust the width of the air knife according to the thickness

• The operation box with washing speed display, can accurately display washing speed (8-10m)

• Water tank automatic temperature control, water replenishing system

• European silencer system

• Stainless steel material

The glass washing machine is used to wash small size of glass specially, the brushes can be choosed in soft brushes or hard brushes, wash low-e glass or common float glass. size 2000*2500mm size 280*400mm
Glass thickness 3-15mm
Materials Stainless steel
Glass washing speed 2-10m/min
Glass conveyor speed 45m/min
Washing brushes 3 pairs
Water supply Water consumption:0.5t/h conductivity:40μs/cm
Air supply Flow: 0.8m/min
Air pressure ≥0.8MPa
Total power 3P 380V 50Hz (Optional)

Insulating Glass Sealing Robot
Silicone Sealant Sealing Robot
Glass Sealing Robot
Custom Glass Sealing Robot
Glass Lifter
Suction Lifter
Glass Lifting Equipment
Glass Lifter Suction Cup
Glass Cutting Machine
Glass Cutting Table
CNC Glass Cutting Machine
Automatic Glass Cutting Machine
Glass Edge Finishing Machine
Custom Glass Edging Machine
Manual Belt Grinding Machine


 Kation-Tech founded in 2009, specializes in R&D, production and sales of Insulating glass machinery and related auxiliary equipment for the glass deep processing industry and the door and window construction industry. Has the professional processing basis of insulating glass machinery, aluminum-plastic windows & doors machinery and the related auxiliary materials, etc. In this way, we provide the most comprehensive glass processing solution and windows & doors solution for domestic and foreign customers well. Until 2019, we exported glass machines and materials to America, South America, Europe, the Middle East, India and so on, nearly 30 countries and regions. We have established a perfect international business relationship with 10 powerful agents and made an endeavor together to build a famous international brand to the world. Kation-Tech, with craftsmanship, profession and honesty, wins the future with you together!

Company Info

  • Representative: jichangpeng
  • Product/Service: Insulating Glass Production Line , Spacer Bending Machine , Insulating Glass Sealing Robot , Glass Lifter , Glass Cutting Machine , Glass Washing Machine
  • Capital (Million US $): 3000000RMB
  • Year Established: 2009
  • Total Annual Sales Volume (Million US $): US$2.5 Million - US$5 Million
  • Export Percentage: 41% - 50%
  • Total Annual Purchase Volume (Million US $): Below US$1 Million
  • No. of Production Lines: 3
  • No. of R&D Staff: 11 -20 People
  • No. of QC Staff: 5 -10 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 10,000-30,000 square meters
  • Factory Location: Qihe
  • Contact Person: Ms. June
  • Tel: 86-0531-18678875966
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters