Black White Acetal Plastic ESD POM Sheet
|Payment Type:||T/T,D/P,Paypal,Money Gram,Western Union|
|Terms of Trade:||FOB,CFR,CIF,EXW,FCA,CPT,CIP|
|Min. Order:||1 Piece/Pieces|
|Delivery Time:||5 Days|
|Packaging:||Export carton pallet|
|Place of Origin:||CHINA|
|Certificate:||SGS RoHS Reach ISO9001|
Model No.: HONYPOM-ESD
Production description: HONYPOM-ESD is an antistatic material made with polyoxymethylene as the base material, and its use temperature is -40-100°C. Very suitable for machining on automatic lathes, especially suitable for manufacturing precision parts .Plastic antistatic POM polyacetal delrin sheet,which Can replace most of the non-ferrous metal, automobile, machine tools, instrument parts, bearings, fasteners, gears, springs, pipelines, Conveyor Belt accessories, electric machine, pump shell, drop water boil, faucets and so on.
Product features: wear resistance, high rigidity, high hardness, good mechanical properties, good self-lubricating performance, no water absorption
Product shortcomings: not resistant to strong acids, especially mineral acids, not resistant to ultraviolet rays, and not fireproof
Scope of application: sensitive electronic components, mechanical transmission parts, precision mechanical parts, electronic and electrical parts, etc.
Applications: semiconductor test fixtures, semiconductor liquid crystal manufacturing equipment parts, fixtures during wafer processing, sensitive electronic components, hard disk drive components, printed circuit boards, electronic equipment installation, fixtures, rails, trays, gaskets, bushes, Liners, wheel rollers, etc.
Color: beige, black
Specification: Plate: Thickness×Width×Length 6-200mm×620mm×1230mm
Bar: Diameter×Length 6-200mm×1000mm
|HONYPOM-ESD Technical Data Sheet|| || || |
|Property item||Testing method||Unit||Testing data|
| Mechanical properties |
| Tensile strength at yield ||ASTM D638||Mpa||79|
| Elongation at break ||ASTM D638||%||22|
| Bending strength ||ASTM 790||Mpa||100|
| Flexural modulus ||ASTM 790||Mpa||2800|
| Shore Hardness ||ASTM D2240||D||80|
| Impact strength ||ASTM D256||J/M||50|
| Thermal performance |
| Melting point ||DSC||℃||170|
| Heat distortion temperature ||ASTM D648||℃||120|
| Long-term working temperature ||-||℃||100|
| Short-term working temperature ||-||℃||130|
| Thermal conductivity ||DIN 52612-1||W/(K-M)||0.33|
| Coefficient of linear expansion ||ASTM D696||10-5-1/K||13|
| Electrical properties |
| Dielectric strength ||ASTM D150||KV-mm||-|
| Dielectric loss coefficient ||ASTM D150||-||-|
| Volume resistance ||ASTM D257||Ω.cm|| |
| Surface resistance ||ASTM D257||Ω||106-109|
| Dielectric constant ||ASTM D149||-||-|
| Chemical properties |
| Balanced water absorption ||23℃ 60%RH||%||0.26|
| Acid resistance ||23℃ 60%RH|| ||+|
| Alkali resistance || || ||+|
| Acid and alkali water resistance || || ||+|
| Chloric acid and alkali resistance || || ||0|
| Resistant to aromatic compounds || || ||+|
| Copper resistance || |
| Hot water resistance ||23℃ 60%RH|| ||+|
| Other properties |
| Combustibility ||UL 94|| ||HB|
| Stickiness || || ||+|
| toxic free and safe ||EEC 90/128 FDA|| ||+|
| Coefficient of friction ||DIN 53375|| ||-|
| anti-UV ||-|| ||0|
1."+" Tolerable , “-”Intolerable , "0" Depends on the situation
2. The above data is obtained from raw material test data, which is not completely consistent with the performance of the finished product, and the uniqueness of the data is not guaranteed
Static electricity is a kind of static charge, which usually refers to the positive and negative charges generated on the surface of the object due to the friction between different objects.
Electrostatic discharge: refers to the transfer of electrostatic charge between objects caused by direct contact or electrostatic induction of objects with different electrostatic potentials, usually refers to the phenomenon of piercing the intermediate medium after the electrostatic field capacity reaches a certain level to discharge.
The necessity of plastic anti-static
Plastics are all high-molecular materials, and their surface resistance or volume resistance is greater than the 1012 power without any treatment, which gives the plastic material good insulation properties. And because of this reason, it is very easy to generate static electricity, because plastic and its products are extremely possible in production, handling, contact, separation, friction, collision, and electromagnetic induction. It is even impossible to avoid these occasions. Brings about the factor of static electricity.
Prevention and treatment of plastic static
1. Add a synthetic permanent antistatic material, which can form a fibrous conductive network inside the polymer, which can export the static charge accumulated on the polymer surface, and permanently eliminate the charge on the surface of various polymers to achieve antistatic performance .
2. Directly use conductive plastic to process its products, which is the origin of conductive plastic (resin) production.
ESD standard :
Conductive : 103 104 105
Anti-static : 106 107 108
High anti-static : 109 1010 1011
Insulation : 1012
Hony Engineering Plastics Co.,Ltd.
HONY Engineering Plastics Co., Ltd is a national high-technology enterprise integrating R&D, production and sell a wide range of engineering plastics in semi-finished format such as sheets, plates , rods, tubes, flat bars, profiles and finishing machining right through to precise machined parts. Value added services include: Saw Cutting, Laser Cutting & Etching, Routing, Welding, Drilling, Bending, Forming, Polishing, Gluing, Injection Molding & CNC Milling. Since its inception, the company has been adhering to the philosophy of technical service customers, and has assembled a professional technical team with more than ten years of experience in precision processing of plastic semi-finished products and plastics, dedicated to aerospace, medical equipment, semiconductor industry, communications, mechanical equipment manufacturing, hardware and electrical appliances, the ship industry, mining machinery, petrochemical machinery and many other industries. To provide customers with one-stop service, the links include pre-sale material selection, integrated sales processing solutions, and after-sales tracking products.
Its registered brand is HONY,HONYPRO,HONYPLAS,HONYESD,HONYFLUO. We always adhere to the principle of "low cost, high quality" to provide customers with customized solutions for engineering plastics, and to serve customers with high-quality products and technologies. Welcome to contact us, HONY will serve you wholeheartedly.
HONY Workshop have 2 axis, 3 axis, 4 axis, 5 axis with HAAZ machining center and SWISS machining center.
- Company Name: Hony Engineering Plastics Co.,Ltd.
- Representative: ZOU SHU YA
- Product/Service: Plastics Sheet , Plastics Rod , CNC Plastic Machined Parts , CNC Metal Machined Parts , Plastics Injection Molding , Antistatic Material
- Capital (Million US $): 200万
- Year Established: 2008
- Total Annual Sales Volume (Million US $): Above US$100 Million
- Export Percentage: 91% - 100%
- Total Annual Purchase Volume (Million US $): Above US$100 Million
- No. of Production Lines: 38
- No. of R&D Staff: 11 -20 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 10,000-30,000 square meters
- Factory Location: 3rd Floor,Building 9,Wu Shi Gang Industry Zone,Dalang street,Longhua District,Shenzhen,Guangdong province,China
- Contact Person: Ms. Tina
- Tel: +86-755-21045157
Premium Related Products